Here we have shared the files to download and install Stock Firmware on JMGO J6S Projector under Amlogic processor. The device comes packed with Android 4.4.2 KitKat firmware. If you are looking for JMGO J6S Projector Stock Firmware, then you are in the right place.

Don’t worry, you know sometimes things do not go too well with Android Projector. One of the easiest and quick fixes for most of the issues on the Android Projector is just installing the latest Stock firmware on JMGO J6S Projector. So, today, in this post, we would be covering on How to Install JMGO J6S Projector Stock Firmware. Now, if that sounds interesting, let us top into it. Should we?

Advantages of Installing Stock ROM

Here are some of the advantages of installing stock ROM on your JMGO J6S Projector:

  • You can unbrick your bricked device.
  • Fix the boot loop issue by installing the Stock ROM.
  • To upgrade or downgrade.
  • To fix bugs lags on your Android Device.
  • This Software Update helps to solve the issue with WiFi, Bluetooth and more.

So, now let us move on to the JMGO J6S Projector Stock Firmware section. Should we?

Firmware Details:

Package Name: JMGO J6S firmware Device Model: JMGO J6S Projector File Size: 395 MB Processor: Amlogic chip Android OS: 4.4.4 KitKat Build Number:  update_jmgo.zip

Download Firmware:

Steps to Install JMGO J6S Projector Stock Firmware

Now, before we get straight to the Steps to Install JMGO J6S Projector Stock Firmware, let us take a look at some of the prerequisites.

Prerequisites

  • Please note that this guide will work only with the JMGO J6S Projector.
  • You should have a formatted USB Drive for this guide.
  • Make sure that you turn on your Projector until the installation process completes.

Once you have the above prerequisites, you can proceed to Instructions to Install JMGO J6S Projector Stock ROM.

Instructions to Install:

Here are the instructions you need to follow in order to install Stock firmware on the JMGO J6S Projector :

  • First of all format your USB Pen Drive to FAT32 slot
  • Now download the ROM package and move it to the root directory of the SD Card.
  • You need to connect your USB drive to the device using USB 2.0 Jack.
  • Now on your project, Go to Settings -> Update –> Choose Local Storage.
  • Wait for a couple of minutes until the device restarts automatically.
  • After the restart is completed, enjoy the new update.

So that’s it guys, this was our take on How to Install JMGO J6S Projector Stock Firmware [Stock ROM Flash File]. We hope that you found this post useful. Let us know what do you guys think about it in the comments section down below.